Table of Contents
Advertisement
Adjusting the Lens
3
Slide the M button toward the rear of the
camcorder, and turn the MACRO ring fully in the
direction shown by the arrow.
4
Move the ZOOM selector to the MANU. position,
and turn the manual zoom control to focus the
image.
Ending close-up shooting
Return the MACRO ring to its original position (turn
fully in the opposite direction to the arrow in the
figure).
Reducing the size of the image
After completing steps 1 to 4 above, if you wish to
reduce the size of the image, turn the MACRO ring
back slightly, then use the manual zoom control again
to focus the image.
136
Chapter 5 Adjustments and Settings
Advertisement
Table of Contents
