Plotting Data - Texas Instruments TI-83 Plus Manual

• To insert a formula for the list, such as L
− Press \ ¢, \ £, \ ¤, etc., to enter the list name.
− Use any of the following operators: ¥, ›, ‘, ‡, ®, },
y, ƒ, \ &, , \ *, —, \ -, \ '.
• The list contents are generated by applying the formula entered
at the list header level to each cell in the referenced lists.
• Cell contents of a formula-generated list do not change if the
formula-referenced list is changed unless the formula was
entered in quotation marks. For example, L
• Press s to delete the list contents when the active cell is
the cell header. For example, to delete the contents of L
press s and then ¯.
move the cursor to the cell header (which shows L

Plotting Data

You can plot data for lists you have created. Each list must
contain at least three elements.
arrow keys (free-moving cursor), or by pressing U and then
After the plot is drawn, you can explore its values by pressing the
pressing the arrow keys (cursor is positioned only at the data
elements of the plotted lists).
TI-83 Plus Science Tools Application
=L ^2, you can:
2 1
="L ^2".
2 1
) and
1
,
1
Page 48