Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
ELECTRIC ROTARY HAMMER CT0700 & CT0701
CAUTION:
Before using this
electric rotary hammer
drill or any of its
accessories, read this
manual and follow all
its Safety Rules and
Operating Instructions
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM
SAVE THESE INSTRUCTIONS FOR REFERENCE
ORIGINAL INSTRUCTION
.
Safety
Instructions
Assembly
Operation
Maintenance
Parts List
Advertisement
Table of Contents
Related Manuals for Neilsen CT0701
Summary of Contents for Neilsen CT0701
- Page 1 ELECTRIC ROTARY HAMMER CT0700 & CT0701 ORIGINAL INSTRUCTION CAUTION: Before using this Safety electric rotary hammer Instructions drill or any of its Assembly accessories, read this Operation manual and follow all Maintenance its Safety Rules and ...
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: ELECTRIC ROTARY HAMMER Model: CT0700 & CT0701 Applicable EC Directives: EC-Machinery Directive 2006/42/EC EC-Directive of Electromagnetic Compatibility（EMC）2014/30/EU... -
Page 3: Specifications
SPECIFICATIONS ROTARY HAMMER Model CT0700 CT0701 SDS Chuck SDS fitting SDS fitting Voltage 230V~ 50Hz 110V~ 60Hz No Load Speed 0-860/min 0-860/min No. of strokes, 0-4250Bpm 0-4250Bpm under load Input power 1500 W 1500 W Drilling capacity in Concrete mm... -
Page 4: Power Tool Safety
POWER TOOL SAFETY GENERAL SAFETY RULES If operating a power tool in a damp WARNING location is unavoidable, use a residual current device (RCD) protected supply. Read all safety warnings and all Use of an RCD reduces the risk of electric instructions. - Page 5 POWER TOOL SAFETY ensure that the safety of the power tool is POWER TOOL USE AND CARE maintained. Do not force the power tool. Use the When servicing a tool, use only identical correct power tool for your application. replacement parts. Follow instructions in The correct power tool will do the job better the Maintenance section of this manual.
- Page 6 POWER TOOL SAFETY SPECIFIC SAFETY RULES – cont’d This symbol designates TO AVOID INJURY from accidental that this tool complies to European directives. starting, always remove the Plug from the electrical socket before installing or Were ear and eye removing a drill bit, accessory or protection attachment.
- Page 7 KNOW YOUR ELECTRIC HAMMER Rotary Hammer Oil gauge Trigger SDS chuck Carbon brush Motor Housing...
-
Page 8: Carton Contents
ACCESSORIES & CARTON CONTENTS CARTON CONTENTS AVAILABLE ACCESSORIES WARNING Drill no CT0700 & CT0701 DESCRIPTION Use only accessories recommended for Rotary Hammer this Rotary hammer . Follow instructions that accompany accessories. Use of SDS Chisels improper accessories may cause injury to the operator or damage to the rotary hammer drill. -
Page 9: Assembly And Operation
ASSEMBLY & OPERATION FIT CHISEL OR DRILL (Fig 3) WARNING Slide back the locking sleeve. Caution: Always make sure the power tool is Make sure the tool is switched off and isolated from the power supply before unplugged and wear protective gloves. fitting any attachment Fit the SDS-plus chisel or drill into the Adjust the handle. - Page 10 ASSEMBLY & OPERATION plaster or tile (Fig. 4). Regardless of the pressure applied on the trigger, the tool will not operate any faster than maximum speed setting selected. Hammer mode: Drill in masonry, concrete and natural stone. Fig 4 WARNING Drilling mode: Drilling in wood, synthetic materials and This rotary hammer drill does not have...
-
Page 11: Maintenance
CAUTION: ASSEMBLY & OPERATION • There is a tremendous and sudden twisting force exerted on the tool/bit at the time of hole break-through, when the hole becomes WARNING clogged with chips and particles, or when Have you read “POWER TOOL striking reinforcing rods embedded in the SAFETY”, “Hammer DRILL SAFETY”... - Page 12 DO NOT attempt to modify tools or create accessories not recommended. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury. It will also void the warranty. LUBRICATION All of the bearings in these electric tools are lubricated with a sufficient amount of high- grade lubricant for the life of the unit under normal conditions.
-
Page 13: Parts Diagram
PARTS DIAGRAM... -
Page 14: Parts List
PARTS LIST...