Before You Connect With Your Smartphone - Merlin Commander Ultimate MJ3800MYQ Installation And Operating Instructions Manual

Introduction

Before You Connect with Your Smartphone

Monitor and control your garage door away from home using the myQ
BEFORE YOU BEGIN:
You will need:
• Wi-Fi enabled smartphone, tablet or laptop
• Broadband Internet Connection
• Wi-Fi signal in the garage (2.4 Ghz, 802.11b/g/n required)
• Password for your home network (router's main account, not guest network)
TEST THE WI-FI SIGNAL STRENGTH
Make sure your mobile device is connected to your Wi-Fi network. Hold your mobile
device in the place where your garage door opener will be installed and check the Wi-Fi
signal strength.
See page 24 to connect the garage door opener to a mobile device.
app.
®
Check Signal Strength. If you see:
Wi-Fi signal is weak.
The garage door opener may connect
to your Wi-Fi network. If not, try one
of the options below to improve the
Wi-Fi signal:
No Wi-Fi signal.
The garage door opener will not be
able to connect to your Wi-Fi network.
Try one of the options below to
improve the Wi-Fi signal:
• Move your router closer to the garage door opener to
minimize interference from walls and other objects
• Buy a Wi-Fi range extender
5
Wi-Fi signal is strong.
The garage door
opener will connect to
your Wi-Fi network.