Checking The Settings On The Destination Device; Registering The Scan Mode Default Settings - Minolta CN3102Pro User Manual

2

Checking the Settings on the Destination Device

Press the [Mode Check] button to view the settings on the destination
device.

Registering the Scan Mode Default Settings

You can arbitrary specify the default settings of the Scan Mode.
1
Press the [Scan] key on the copier operation panel to enter the Scan
Mode.
2
Select the setting to make the default value in the Scan Mode.
3
Press the [Utility] key.
4
Touch the [Input] key.
5
Touch the [Reset Mode] key.
6
Touch the [Set-up Mode] key.
7
Touch the [Input] key.
8
Touch the [Enter] key.
You can set the default settings of the Scan Mode to factory default by
touching [Factory Default].
2-10
Using the Scanner Mode
CN3102Pro