Selecting An Arpeggio Pattern - Korg Krome EX Supplementary Manual

Selecting Programs, Combinations and Other Sounds

Selecting an arpeggio pattern

Assigning an arpeggio pattern to a program
• On the Program mode P0: Play– Arpeggiator page,
select the "Pattern."
Another way to do this:
• On the Program mode P7: ARP DT– ARP Setup
page, select the "Pattern."
Refer to p.4 for how to set the values.
Assigning an arpeggio pattern to a
combination or song
• On the Combination mode P0: Play page, the P7:
ARP/DT– Arpeggiator A page, or the Arpeggiator B
page, select the "Pattern."
• On the Sequencer mode P0: Play page, the P7:
ARP/DT– Arpeggiator A page, or the Arpeggiator B
page, select the "Pattern."
6
En-
Pattern
Pattern
Pattern
Note: Set "Arpeggiator Assign" and "Arpeggiator Run
A, B" on the Combination mode or Sequencer mode
P7: ARP/DT– ARP Setup T01–08 page and the ARP
Setup T09–16 page. For details, refer to the KROME
Operation Guide and Parameter Guide.
Customizing an arpeggio pattern
1. On the Global mode P6: Arpeggio Pattern– Setup
page, select the "Pattern."
Pattern
Refer to p.4 for how to set the values.
For Write, Copy, Load, and MIDI Dump
functions
In each dialog box for Write Arpeggio Patterns as well
as Copy, Load and MIDI Dump-related functions,
select an Arpeggio pattern and execute each function.
Pattern