Components Used; Network Diagram; Background Information; C−Series Troubleshooting Tips - Cisco UCS C-Series Troubleshooting Tips

Components Used

The information in this document is based on Cisco UCS C−Series Servers.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a default configuration. If your network is live, make sure that you
understand the potential impact of any command.

Network Diagram

There is currently no specific network diagram available.
Conventions
Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Background Information

There is currently no specific background information available.
C−Series Troubleshooting Tips
Common troubleshooting tips on C−Series servers are provided in this section.

Obtaining Showtech Support to TAC

Perform this task when requested by the Cisco Technical Assistance Center (TAC). This utility creates a
summary report containing configuration information, logs, and diagnostic data that will help TAC in
troubleshooting and resolving a technical issue.
This showtechsupport is available from GUI and CLI to tftp upload a techsupport file for offline analysis.
Complete these steps in order to obtain showtech via GUI:
1. In the Navigation pane, click the Admin tab.
2. From the Admin tab, click Utilities.
3. In the Actions area of the Utilities pane, click Export Technical Support Data.