Table of Contents
Advertisement
Servicing a Compute Node
Internal Components
Figure 7: Cisco UCS X210c M6 Compute Node
1
3
5
7
9
11
Replacing a Drive
You can remove and install some drives without removing the compute node from the chassis. All drives have
front-facing access, and they can be removed and inserted by using the ejector handles.
Front mezzanine slot for NVMe
or SATA drives
Front mezzanine slot connectors
DIMM slots (32 maximum)
CPU Slot 2 (unpopulated)
Trusted Platform Module (TPM)
connector
Bridge Card, which connects rear
mezzanine card and the mLOM
Cisco UCS X210c M6 Compute Node Installation and Service Note
2
Hardware storage controller slot
for front mezzanine drives
4
CPU Slot 1 (populated)
6
M.2 module connector
8
Motherboard USB connector
10
Rear mezzanine slot, which
supports X-Series mezzanine cards,
such as VIC 14825.
12
mLOM slot for an X-Series
mLOM network adapter, such as
VIC 14425.
Internal Components
17
Advertisement
Table of Contents
