Sony DCR-TRV Operating Instructions Manual page 184

Changing the menu settings
Icon/item
OTHERS
DATA CODE
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
VIDEO EDIT
* Except DCR-TRV16
Note
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your
camcorder is connected to outputs on the TV or VCR.
In more than five minutes after removing the power source
The "PROGRAM AE", "AUDIO MIX", "COMMANDER", "HiFi SOUND", and "WHT
BAL" settings are returned to their factory settings.
Other menu settings are held in memory even when the battery is removed.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the subject if it is close. In this case, we recommend that you
184
set REC LAMP to OFF.
Mode Meaning
z DATE/CAM To press DATA CODE on the Remote
Commander to display date, time and various
settings during playback (p. 39)
DATE To press DATA CODE on the Remote
Commander to display date and time during
playback
— To set the clock to the local time. Turn the SEL/
PUSH EXEC dial to set a time difference. The
clock changes by the time difference you set
here. If you set the time difference to 0, the clock
returns to the originally set time.
z MELODY To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
NORMAL To output the beep instead of the melody
OFF To cancel the melody and beep sound
z ON To activate the Remote Commander supplied
with your camcorder
OFF To deactivate the Remote Commander to avoid
erroneous remote control operation caused by
other VCR's remote control.
z LCD To show the display on the LCD screen and in
the viewfinder
V-OUT/LCD To show the display on the TV screen, LCD
screen and in the viewfinder
z ON To light up the camera recording lamp at the
front of your camcorder
OFF To turn the camera recording lamp off so that
the person is not aware of the recording
z RETURN* To cancel video editing
TAPE* To make program and perform video editing
(p. 78)
MEMORY* To make program and perform MPEG editing
(p. 132)
POWER
switch
VCR
MEMORY
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
CAMERA
MEMORY
VCR