Sony Handycam DCR-SR30E Handbook page 108

The image or sound on your camcorder cannot be played back correctly.
• When you connect your camcorder to a computer not compatible with Hi-Speed USB (USB
2.0), it may not be able to be played back correctly. However, it does not affect the images or
sounds copied to your computer.
• When you set [USB SPEED] to [FULL SPEED] (p.58), it may not be able to be played back
correctly. However, it does not affect the images or sounds copied to your computer.
• Depending on the computer you use, the played back image or sound may stop temporarily,
but this does not affect the images or sound copied to your computer.
"ImageMixer for HDD Camcorder" does not function correctly.
• Close "ImageMixer for HDD Camcorder", then restart the computer.
An error message appears while operating "ImageMixer for HDD Camcorder".
• Close "ImageMixer for HDD Camcorder" first, then slide the POWER switch on your
camcorder to turn on another lamp.
The actual display and message look different on your computer.
• The actual display and message may look different.
The extension of a file is not displayed on your computer.
• To display the extension, follow the steps below.
1 Click [Tool] in the window folder t [Folder option...] t [View] tab.
2 Remove the check mark from the [Hide file extensions for known file types] under Advanced
Settings.
3 Click [OK].
If you press the DVD BURN button on the Handycam Station, the software on the
computer does not run.
• Set the camcorder onto the Handycam Station securely (p.15).
• After
While performing Easy PC Back-up, [Not enough space on destination hard disk.]
is displayed on the computer screen.
• Delete unnecessary files from your computer to provide free hard disk space (p.97).
You cannot change the lit status of the power lamps on the camcorder.
• When using the USB connection, you cannot change the lit status of the power lamps on the
camcorder. Cancel the USB connection.
108
appears in the task tray on the screen of your computer, press DVD BURN again.