Sony Handycam DCR-PC9E Operating Instructions Manual page 177

Digital video camera recorder
Hide thumbs Also See for Handycam DCR-PC9E:
Table of Contents

Advertisement

Superimposing a still image in a
"Memory Stick" on a moving
picture – MEMORY MIX
Items to adjust
M. CHROM
The colour (blue) scheme of the
area in the still image which is to
be swapped with a moving
picture
M. LUMI
The colour (bright) scheme of the
area in the still image which is to
be swapped with a moving
picture
C. CHROM
The colour (blue) scheme of the
area in the moving picture which
is to be swapped with a still
image
M.OVERLAP
No adjustment necessary
The fewer bars there are on the screen, the
stronger the effect.
To change the still image to be
superimposed
Press –/+ on the right lower corner before step 6.
To cancel MEMORY MIX
Press
OFF to return to PAGE2.
Note
You cannot change the still image to
superimpose in the memory overlap mode. Once
cancel the memory overlap mode to change the
still image.
To press PHOTO button in step 8
You can record a still images on a tape.
Een stilstaand beeld van een
"Memory Stick" samenvoegen met
bewegende beelden (MEMORY MIX)
Punten die u kunt bijregelen
M. CHROM
De kleur (blauw) van het
gedeelte in het stilstaande beeld
dat moet worden "ingevuld" met
bewegende beelden.
M. LUMI
De kleur (helder) van het
gedeelte in het stilstaande beeld
dat moet worden "ingevuld" met
bewegende beelden.
C. CHROM
De kleur (blauw) van het deel
van de bewegende beelden dat
moet worden "ingevuld" met een
stilstaande beeld.
M.OVERLAP
Hierbij zijn geen instellingen
nodig.
Hoe minder balkjes er op het scherm verschijnen,
des te krachtiger het effect.
Keuze van een ander stilstaand beeld
voor de dubbelbeeld-weergave
Druk op de –/+ toetsen rechtsonder op het
scherm alvorens u stap 6 uitvoert.
Uitschakelen van de MEMORY MIX
dubbelbeeld-weergave
Druk op de
OFF toets om terug te keren naar
het PAGE2 scherm.
Opmerking
U kunt in de M. OVERLAP functie niet
overschakelen naar een ander stilstaand beeld
voor de dubbelbeeld-weergave. Om een ander
stilstaand beeld te kiezen, zult u de M.
OVERLAP functie eerst moeten uitschakelen.
Als u op de PHOTO toets drukt voor stap 8
Dan kunt u een stilstaand beeld op de band
opnemen.
177

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Handycam dcr-pc6eDcr-pc9eDcr-pc6e

Table of Contents