Give The System A Little Time To Adapt; Time Temperature - Danfoss Link User Manual

General system information
If you use the weekly schedule and change the
temperature during a At Home period, then
this may be a general preference for a different
temperature. This type of modification will be
permanently saved and will thus become the
new standard At Home temperature for the
room in question.
At Home period
21,0 21,5
^
Here you can turn
up the temperature

Give the system a little time to adapt...

The first week after the system is started up in
weekly schedule, it will take a bit of time for it
to become familiar with its new surroundings.
It is during this first week that the Danfoss Link
system learns how quickly the different rooms
can be heated.

Time Temperature

12:00 17,0 ˚C
12:30 17,0 ˚C
13:00 18,2 ˚C
13:30 19,5 ˚C
14:00 20,5 ˚C
14:30 20,8 ˚C
15:00 21,0 ˚C
link.danfoss.com
Danfoss Link
^
Customize
Room
Please note: This describes the factory settings; your
installer may have set the system up to also
remember modifications made locally during
an Away/Asleep period.
At Home
The change is automatically saved in
the Danfoss Link™ system and is now
the new desired temperature for all
21,5˚
At Home periods.
?
For example, if you set your weekly schedule
to 21 ˚C at 3 pm, the system uses the informa-
tion it has gathered to determine when to be-
gin a reheating cycle as well as how to account
for seasonal temperature differences.
VASUA202