Changing The Time, Date, Sound Or Display - Danfoss Link User Manual

General system information

Changing the time, date, sound or display

If you would like to change the date and time
or modify the display appearance or sound of
the user interface, you can do so in Settings
located under the House control menu.
Uh oh - the batteries are dead. Now what happens?
When the battery-operated units are close to
running out of power, an alarm will be issued
on the central control panel well before the
batteries are completely used up.
The system will not "forget" anything even if a
unit temporarily loses power.
In the event of a battery-operated unit running
completely out of power, the unit will set the
room to a certain temperature before the bat-
teries die.
Please note: Danfoss recommends the use of non-
rechargeable, alkaline batteries (2 x AA per
room unit), for which you can expect an
average battery lifetime of 2 years.
link.danfoss.com
Danfoss Link
Start
Start a special mode
Vacation
At Home
Pause
Heat control and settings
House control
?
+ +
VASUA202