Humidity Settings - Johnson Controls S1-TTSCC01 User's Information Manual

Emergency Emergency
Heat Heat
Fan Fan Humidity Humidity Status Status
Dealer Dealer Tools Tools Clean Clean
Alert: Change Filter Alert: Change Filter
Fan Adjust
Function: Auto Manual Schedule
45%
xx%
Run fan 30 minutes Per Hour
Cancel

HUMIDITY SETTINGS

In non-programmable mode, your Communicating Control humidity setting defaults to auto mode.
In programmable mode, the humidity setting defaults to schedule mode.
1. Press Menu.
NOTE: Or press the quick access Humidity icon on
the right side of your screen.
2. Press Humidity icon.
3. Select the Humidity mode.
a. Humidification – Select the Heat mode sym-
bol.
b. Dehumidification – Select the Cool mode
symbol.
4. Select Humidity function.
a. Auto – Automatically sets the humidity set-
point based on indoor temperature.
NOTE: Auto mode requires an outdoor sensor.
b. Manual – Manually set the humidity setpoint.
i. Select your desired indoor humidity
percentage level.
NOTE: If you start seeing condensation building up
on your windows, lower the humidity setpoint or
switch to auto mode.
c. Schedule – Follows program schedule humidity settings (See Page 9 for more information).
NOTE: Schedule option is only available in programmable modes.
5. Select check box to display humidity information on home screen.
6. Press OK when you are done.
Johnson Controls Unitary Products
2. Press Fan icon.
3. Select the Fan function.
a. Auto – runs only with equipment.
b. Manual – runs intermittently to circulate air.
Settings Settings
NOTE: Manual mode is not available for all sys-
tems.
i. Adjust the speed of your fan motor.
Schedule
NOTE: The lower the speed the less electricity con-
Close Close
sumed.
ii. Select the fan run time. Choices are 15,
30, and 45 minutes per hour or Always.
Show Fan on
c. Schedule – follows program schedule fan
Home
settings (see Page 9 for more information).
NOTE: Schedule option is only available in pro-
100% grammable modes.
4. Select check box to display fan icon on home
screen.
5. Press OK when you are done.
OK
Humidity Adjust
22%
Mode:
Function:
Humidity Adjust
22%
Mode:
Function:
35%
542937-UUM-A-1010
Show Humidity
Level on Home
When Heating...
Auto Manual Schedule
Cancel OK
Show Humidity
Level on Home
When Heating...
Auto Manual Schedule
45%
100%
Cancel OK
7