System Settings; Fan Settings - Johnson Controls S1-TTSCC01 User's Information Manual

542937-UUM-A-1010

SYSTEM SETTINGS

Your Communicating Control is preset to OFF mode (neither heating or cooling modes are
selected).
In Non-Programmable mode, Auto mode cannot be activated. If Auto mode is desired, change the
View/Mode to either Programmable or Advanced Programmable (see page 5 for details).
11:07AM Thu 21 Jul
55°
72°
71 °
Humidity3 dity y 3 3 3 30% 0 0 0 0 0 % % % % %
72°
Alert: Change Filter
Emergency Emergency
Heat Heat
Fan Fan Humidity Humidity Status Status
Dealer Dealer Tools Tools Clean Clean
Alert: Change Filter Alert: Change Filter

FAN SETTINGS

In non-programmable mode, the fan setting defaults to the schedule currently active in the calendar.
In programmable mode, the fan setting defaults to schedule mode.
1. Press Menu at the bottom right side of your screen.
Or press the quick access Fan icon on the right side of your screen.
6
• Off mode: Neither Heating or Cooling icons are
illuminated.
• Heat mode: Heating icon is illuminated
(red glow ring indicates heat equipment opera-
ON
tion).
• Cool mode: Cooling icon is illuminated
Auto
(blue glow ring indicates cool equipment opera-
tion).
• Auto mode: Both Heating and Cooling icons
are illuminated (red/blue glow ring indicates
Menu
heat/cool equipment operation).
• Emergency Heat: Emergency Heat button is
selected via the Menu screen
(only for heat pumps with electric heat strips).
Settings Settings
Schedule
Close Close
NOTICE
Johnson Controls Unitary Products