(Dcr-Hc36E/Hc46E/Hc96E) - Sony Handycam DCR-HC36E Operating Manual

DCR-HC46E/HC96E:
A/V jack (DCR-HC96E)
A/V
DV
To
(i.LINK)
: Signal flow
A For DCR-HC96E:
A/V connecting cable (supplied)
The Handycam Station and your camcorder
are both equipped with A/V jacks. Connect
the A/V connecting cable either to the
Handycam Station or to your camcorder,
depending on your setup.
B For DCR-HC96E:
A/V connecting cable with S
VIDEO (optional)
When connecting to another device via the S
VIDEO jack, by using the A/V connecting
cable with an S VIDEO cable, pictures can be
reproduced more faithfully than with the
supplied A/V cable connection. Connect the
white and red plugs (left/right audio) and S
VIDEO plug (S VIDEO channel) of an A/V
connecting cable. In this case, the yellow
(standard video) plug connection is not
necessary. S VIDEO connection only will not
input audio.
1
AUDIO/VIDEO
jacks
(Yellow)
To S VIDEO jack
2
DV Interface
(White) (Red)
To i.LINK jack
3
C i.LINK cable (optional)
Use an i.LINK cable to connect your
camcorder to another device equipped with an
i.LINK jack. The video and audio signals are
transmitted digitally, producing high quality
pictures and sound. Note that you cannot
input the picture and sound separately.
• While your camcorder is receiving signals from
another device via an i.LINK cable,
appears on the LCD screen on your
camcorder (This indicator may also appear on
the connected device.).
• For DCR-HC96E:
When you are connecting your camcorder to a
monaural device, connect the yellow plug of the
A/V connecting cable to the video jack, and the
red (right channel) or the white (left channel)
plug to the audio jack on the VCR or the TV.
• For DCR-HC96E:
When you connect a device via an A/V
connecting cable, set [DISP OUTPUT] to [LCD
PANEL] (the default setting) (p. 64).
TV or VCR
device,
etc.
AV device
with i.LINK
output jack
71
Continued ,