Sony Handycam DCR-HC32E Operating Manual page 77

To cancel the operation
Touch [CANCEL] on the LCD screen on
your camcorder.
• You cannot cancel the operation after
[Finalizing DVD.] is displayed on the LCD
screen of your camcorder.
• Do not disconnect the i.LINK cable or set
the POWER switch to another mode on your
camcorder until the picture is completely copied
to the computer.
• When [CONVERTING] or [WRITING] is
displayed on the screen, capturing of pictures
has already finished. Even if you disconnect
the i.LINK cable or turn off the camcorder at
this stage, DVD creation will continue on your
computer.
• When any of the following occurs, copying of
the picture is canceled. A DVD containing the
data up to the point the operation was canceled
is created. Refer to the help files of "Click to
DVD Automatic Mode Launcher" for details.
– When there is a blank portion of 10 seconds
or longer on the tape.
– When the data of the tape contains a date
before the recording date of the later images.
– When normal and wide size pictures are
recorded on the same tape.
• You cannot operate your camcorder in the
following situations:
– While playing back a tape
– While recording images onto a "Memory
Stick Duo"
– When "Click to DVD" is started up from the
computer
– For DCR-HC32E/HC33E/HC42E/HC43E:
When [A/VDV OUT] in the menu setting
of your camcorder is set to [ON].
77