Sony a (alpha) SLT-A33 Instruction Manual page 115

Note
• The message "Custom WB error" indicates that the value is beyond the expected
range. (When the flash is used on a subject in close proximity or a subject with a
bright color is in the frame.) If you register this value, the
on the recording information display. You can shoot at this point, but it is
recommended that you set the white balance again to get a more correct white
balance value.
To call the custom white balance setting
WB on the control button t
(Custom)
Note
• If the flash is used when the shutter button is pressed, a custom white balance is
registered with the flash light taken into account. Take pictures with the flash in later
shootings.
indicator turns yellow
115