6.27. Remove the front bracket
1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (G1 and G51).
3. Remove the screws (×5
6.28. Remove the G-Board, GK-
Board and GS-Board
1. Remove the front bracket. (See section 6.28.)
2. Remove the screws (×3
metal frame.
3. Remove the screws (×3
(G3-GK3).
4. Remove the G-Board and GK-Board.
) and remove the front bracket.
) and remove the front side
) and disconnect the couplers
TH-50PV600AZ / TH-50PV600H / TH-50PV600M / TH-50PV600MT
6.29. Remove the S-Board
1. Disconnect the coupler (S1).
2. Remove the screws (×2
frame.
3. Remove the screws (×2
6.30. Remove the GS-Board and SD-
Module
1. Remove the stand bracket R. (See section 6.24.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the coupler (G52).
4. Remove the screws (×3
5. Remove the SD card unit.
17
) and remove the S-Board metal
) and remove the S-Board.
).