Sony 4-157-878-12(1) Operating Manual page 13

To store the battery pack
If the battery pack is not in use for a while,
run down the battery and store it. See page
108 for details on storage of the battery
pack.
Charging time
Approximate time (min.) required when
you charge a fully discharged battery pack.
Normal charge
Battery pack
time
NP-F570 140
NP-F770 250
NP-F970 365
b Notes
• The supplied battery pack is NP-F570.
• You cannot use the NP-F330 battery pack with
your camcorder.
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF.
• The Battery Info (p. 52) will not be correctly
displayed under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out.
Using an outside power source
You can use the AC Adaptor/Charger to
obtain AC power.
AC Adaptor/
Charger
Fully charge
time
200
310
425
1 Connect the power cord (mains lead) to
2 Connect the power cord (mains lead) to
3 Connect the connecting cord (DK-415)
4 Set the mode switch of the AC Adaptor/
5 Press the connecting part of the
On the AC Adaptor/Charger
• Use the nearby wall outlet when using the AC
Adaptor/Charger. Disconnect the AC Adaptor/
Charger from the wall outlet (wall socket)
immediately if any malfunction occurs while
using your camcorder.
• Do not use the AC Adaptor/Charger placed in a
narrow space, such as between a wall and
furniture.
• Do not short-circuit the DC plug of the AC
Adaptor/Charger or battery terminal with any
metallic objects. This may cause a malfunction.
To the wall outlet
(wall socket)
Power cord
the AC Adaptor/Charger.
the wall outlet (wall socket).
to the AC Adaptor/Charger.
Charger to VCR/CAMERA.
connecting cord (DK-415) against the
back of your camcorder in the battery
slot and slide it down.
Charge
lamp
Mode
switch
Connecting
cord
DK-415
13
Continued ,