SonicWALL TZ 150 Wireless Getting Started Manual page 13

PPPoE
The Setup Wizard screen should display:
WAN Network Mode - NAT with PPPoE Client
Obtain an
IP Address
Automatically
Use the
following
IP Address
PPPoE User
Name
PPPoE
Password
Inactivity
Disconnect
(minutes)
Click Next.
PPTP
The Setup Wizard screen should display:
WAN Network Mode: NAT with PPTP Client
PPTP Server
IP Address
PPTP
User Name
PPTP
Password
Page 12
Select this if your ISP assigns you a dynamic
IP address.
Select this if your ISP has assigned you a
static IP address, and enter the address.
Enter the user name for your Internet account.
Your ISP may require you to enter your
username in e-mail address format, including
"@" and the domain name, for example,
joe.user@sonicwall.com
Enter the password for your Internet account.
Check this box if you want the
SonicWALL TZ 150 Wireless to disconnect
from the Internet if there is no traffic for the
number of minutes you enter.
Enter the address of the server you are
connecting to.
Enter your network user name.
Enter your network password.