Lifting And Moving The Monitor; Using The Joystick Button; Basic Functions; Setting Up The Monitor - LG MN47 Series Owner's Manual

Lifting and moving the monitor

Please note the following advice to prevent the monitor from being
scratched or damaged and for safe transportation regardless of its
type and size.
• It is recommended to move the monitor in the box or packing
material that the monitor originally came in.
• Before moving or lifting the monitor, disconnect the power cord
and all cables.
• When holding the monitor, the screen should
face away from you to avoid damage.
• Hold the top and bottom of the monitor frame firmly. Make sure
not to hold the transparent part, speaker, or speaker grille area.
• When transporting the monitor, do not expose the monitor to jolts
or excessive vibration.
• When transporting the monitor, keep the monitor upright; never
turn the monitor on its side or tilt towards the left or right.
• Do not apply excessive pressure to cause flexing /bending of frame
chassis as it may damage screen.
CAUTION
• Avoid touching the screen at all times, as this may result in
damage to the screen.
• When handling the monitor, be careful not to damage the
protruding joystick button.

Setting up the monitor

CAUTION
• Do not carry the monitor upside-down by holding the stand body
(or stand base) as this may cause it to fall off, resulting in damage
or injury.
• When attaching the stand to the monitor set, place the screen
facing down on a cushioned table or flat surface to protect the
screen from scratches.
• When detaching the stand to the monitor set, place the screen
facing down on a cushioned table or flat surface to protect the
screen from scratches.
• If you don`t fasten the screw tightly, monitor will fall down and
get damaged.
• Tighten the screws firmly to prevent the monitor from tilting
forward. Do not over tighten.
• Lift up the latch at the bottom of the stand base and detach the
stand base from the monitor.
6

Using the joystick button

You can simply operate the monitor functions, pressing or moving the
joystick button forward, backward, left or right.
• Image shown may differ from your monitor.
Joystick Button

Basic functions

When the monitor is turned off,
place your finger on the joystick
Power On
button and press it once and
release it.
When the monitor is turned on,
place your finger on the joystick
button, press it once for a few
Power Off seconds and release it. (However, if
the menu button is on the screen,
pressing and holding the joystick
button will let you exit the menu.)
If you place your finger over the
joystick button and move it left or
Volume
Control
right, you can adjust the volume
level you want.
If you place your finger over the
Programmes joystick button and move it forward
Control
or backward, you can scroll through
the saved programmes you want.
NOTE
• If you press the joystick button first, you may not adjust the
volume level and saved programmes.
CAUTION
• When your finger over the joystick button and push it to the forward,
backward, left or right, be careful not to press the joystick button.

Adjusting the menu

When the monitor is turned on, press the joystick button one time.
You can adjust the menu items moving the joystick button forward,
backward, left or right.
Turns the power off.
Accesses the main menu.
Clears on-screen displays and returns to monitor viewing
Changes the input source.