Changing The Opening Direction Of The Doors; Pag - Electrolux 275 Operating Instructions Manual

CHANGING THE OPENING DIRECTION
Changing the opening direction of doors
If you wish to change the opening side of the doors proceed as follows:
1... Remove the handles of the doors, if they are side fixing by screws.
2... Take off the plinth pressed on to.
3... Remove the inferior hing taking care for the downer door not to fall off and not to
lose the plastic spacer. Using a 10mm spanner, unscrew the hinge pin and reas-
semble it on the opposite side.
4... Lift the downer door off the central hinge.
5... Remove the central hinge taking care for the upper door not to fall off .
6... Take the upper door off the upper hinge. Be careful not to lose the plastic ring.
7... Unscrew the plastic bolts of the opposite side of the place of the central hinge
taken out and introduce them in the holes occupied before by the hinge.
8... Unscrew the axle of the upper hing and replace it at the opposite side
Place upper door.
For the remaining parts proceed the other way round.
Once finished make sure that all joints close perfectly well as around the
door and chek that the internal light turns of when the fridge door closes.
5