Chapter 2 Connection; Connect Pg To Monitor - C&C TECHNIC PG-HD1X User Manual

Chapter 2 Connection

Caution
Please power off the digital monitor and the device before
you begin the connection.

Connect PG to Monitor

Connect the attached adapter cable from your device to
the power source (outlet).
Switch off the monitor.
Connect the BNC extension cord from your device to the
Digital monitor/TV.
Switch on the power of the Digital monitor/TV.
Push the Power SW of your device to power on/off your
device.
Caution
Please use the Pile Alkaline to the device.
One or Two Digital
monitor/TV
SDI Cable
8