Connection - DirecTV Cinema Connection Kit User Manual

Before you begin the installation of the DIRECTV CINEMA
and TV are powered on. Also, make sure you can connect to the Internet through your wireless router and computer.
Prepare Your DCCK Device for Connection
A. Plug the power adapter into the
Power port of the DCCK device.
Connect Power Adapter
to DCCK Device
NOTE 2: If your Wi-Fi router features Wireless Protected Setup (WPS)*, continue to Step C. One of the images below
should appear on your router if it is WPS capable:
Otherwise continue to the "Determine Your Connection Type" section on page 10.
*WPS allows for easy and secure wireless network setup. WPS can automatically set up network names and wireless
security for wireless routers, access points, computers, adapters, Wi-Fi phones, and other consumer electronics devices.
Connection Kit (DCCK), make sure your DIRECTV
™
B. Plug the other end of the power adapter
or
into a surge protector (recommended)
or an electrical outlet.
Connect Power Adapter
to Electrical Outlet

connection

Receiver
®
7