IMPORTANT: If you did not use WPS to configure the DCCK device, proceed to the "Manual Wireless Setup" section
NOTE 4: The DCCK device should be powered on and connected to the DIRECTV
A. Wait 30 seconds to let the DIRECTV
B. To verify connection to the Internet, press the "MENU" button on your DIRECTV
Control. Select "Parental, Fav's & Setup", then "System Setup", then "Network Setup".
Then select "Connect Now" or "Repeat Network Setup".
on page 23.
Receiver establish a connection with the DCCK device.
®
comPleting wireless Protected setuP
Remote
®
Receiver.
®
21