Nikon EDG Series Instruction Manual page 42

Jp
Mounting and removing
En
Mounting
De
1
Fr
Insert the FSA-L2 into the EDG Fieldscope aligning the inserter/ejector indexes of
both sides.
Es
2
Screw in the FSA-L2 in the direction of the arrow until you hear a click.
It
3
Attach the camera to the FSA-L2, alignng the camera inserter/ejector indexes.
Ru
Loosen the clamp screw first. Then align the two camera position indexes, and
4
tighten up the clamp screw to make the camera position horizontal.
Removing
1
Remove the camera by pressing the lens inserter/ejector button.
2
Slide the inserter/ejector lever in the direction of the arrow, and keep it in
position.
3
Rotate the body in the direction of the arrow, and remove the FSA-L2.
2
1
42
3
3
2
1
Mounting
example
4