Siemens 3TK2810-1 System Manual page 50

Operation
6.3 Configuring
Scenario C:
1. Parameterization:
1.1 Monitored motion:
1.2 Encoder type:
1.3 Encoder selection:
1.5 Encoder resolution:
1.6 Initiator settings:
1.4 Increase/transmit:
The speed limits (rpm) to be set refer to the speed at the encoder.
Scenario D:
1. Parameterization:
1.1 Monitored motion:
1.2 Encoder type:
1.3 Encoder selection:
1.5 Encoder resolution:
1.4 Increase/transmit:
The speed limits (rpm) to be set refer to the speed at the encoder.
Scenario E: Monitoring the slide to, e.g. 3 m/min.
1. Parameterization:
1.1 Monitored motion:
1.2 Encoder type:
1.3 Encoder selection:
1.5 Encoder resolution:
1.6 Initiator settings:
1.4 Increase/transmit:
50
Resolution E2
Transmission:
Transmission:
Resolution E2
Transmission:
Rotational
Rot. encoder
Encoder+E2
512 pulses/rev.
4 pulses/rev.
50:1
Rotational
Rot. encoder
Encoder
512 pulses/rev.
not relevant since only one encoder has
been selected.
Rotational
Rot. encoder
Encoder+E2
512 pulses/rev.
4 pulses/rev.
50:1
3TK2810-1 safety-related speed monitor
System Manual, 01/2011, 926246402000 DS 02