Connecting Terminal Blocks - Siemens 3TK2810-1 System Manual

Connecting

5.2 Connecting terminal blocks

5.2 Connecting terminal blocks
Hazardous Voltage.
Can Cause Death, Serious Injury, or Property Damage.
Before starting work, therefore, disconnect the system and devices from the power supply.
Procedure for screw-type terminal blocks
Step Operating instruction
1 Insert the relevant cable into square on the
screw-type terminal until it engages.
2 Hold the cable in the screw-type terminal.
3 Tighten the screw of the terminal in which the
cable is inserted.
4 Pull on the cable to ensure it is screwed tight.
34
WARNING
Figure
3TK2810-1 safety-related speed monitor
System Manual, 01/2011, 926246402000 DS 02