Denon DCD-F101 Service Manual page 5

5. CD Mecha. Unit
1) Open the Tray completely by turning the gear under the
Mecha. Unit counterclockwise.
2) Remove 2 screws
8
3) Remove 2 rear screws
4) Detach the CD Mecha. in the arrow direction.
5) Lift the CD Mecha., and disconnect FFC and connectors.
6. Main P.W.B. & Power Trans
1) Remove 2 screws .
2) Disconnect 1 connector to take off the Power Trans.
3) Remove 4 screws ,1 screw
and 6 screws on the Rear Panel.
!
4) Detach the Main P.W.B.
• Caution
When inserting the FFC coming out of the CD Mecha.
to the connector base, +B and GND may be short-
circuited if the wires are bent. Connect or disconnect
the wires as straight as possible by holding the FFC
with both hands when connecting or disconnecting the
FFC.
on the Tray.
fixing the CD Mecha.
9
Gear
on the Main P.W.B.,
Power Trans
8
Connector
DCD-F101
9
FFC
CD Mecha. Unit
Connector
!
5