Gigabyte G481-H80 Service Manual page 59

Parameter
Enter Configuration Menu
Description
Press [Enter] to configure advanced items.
Create new VLAN
Š
VLAN ID
Š
– Sets VLAN ID for a new VLAN or an existing VLAN.
– Press the <+> / <-> keys to increase or decrease the desired values.
– The valid range is from 0 to 4094.
Priority
Š
– Sets 802.1Q Priority for a new VLAN or an existing VLAN.
– Press the <+> / <-> keys to increase or decrease the desired values.
– The valid range is from 0 to 7.
Add VLAN
Š
– Press [Enter] to create a new VLAN or update an existing VLAN.
Configured VLAN List
Š
– Enable/Disable the VLAN.
– Options available: Enable/Disable. Default setting is Disable.
Remove VLAN
Š
– Press [Enter] to remove an existing VLAN.
- 59 - BIOS Setup