Gigabyte G481-H80 Service Manual page 13

SAS
Š
Internal
Š
Connectors
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Front Panel
Š
LED/Buttons
Š
Š
Š
Š
Š
Š
Š
Š
Š
Rear Panel I/O
Š
Š
Backplane I/O
Š
(G481-H80)
Š
(G481-H81)
Š
Š
TPM
Š
Supported via add-on SAS Card
3 x 24-pin power connector (CPU + system power rail)
2 x 14-pin power connector (HDD BPB power rail)
1 x 18-pin power connector (fan power rail)
10 x 8-pin power connector (GPGPU power rail)
1 x 8-pin power connector (front board power rail)
11 x slim 8i connector (PCIe signal)
1 x slim 8i connector (front board signal)
2 x slim 4i connector (PCH SATA signal)
1 x slim 4i connector (MLAN + NCSI signal)
1 x slim 4i connector (system sideband signal)
1 x TPM header
1 x HDD back plane board header
1 x IPMB connector
1 x RAID key connector
1 x Clear CMOS jumper
1 x NMI button
2 x USB3.0 connector
1 x MLAN connector with LED (optional for MLAN at rear side of the system)
2 x RJ45 LAN connector with LED
1 x VGA connector
1 x Power button with LED
1 x ID button with LED
1 x HDD activity LED
1 x Reset button
1 x System status LED
2 x RJ45 LAN connector with LED
1 x MLAN connector with LED
10 x 2.5" ports
Supports SATA 6Gb/s and PCIe Gen3 x4
12 x 3.5" ports
Supports SATA 6Gb/s and SAS 12Gb/s
1 x TPM header
- 13 - Hardware Installation