Winnebago Adventurer 27N Manual page 124

SECTION 9 -
FURNITURE AND SOFTGOODS
Manual Retraction of Loft Bed
If the Power Loft Bed is malfunctioning you
may need to manually retract the loft bed.
1. Remove screws from bunk panel above driver
seat to access loft bed motor.
2. Remove panel and set aside.
3. Remove Loft Bed manual retractor from
InfoCase.
4. Insert manual retractor into loft bed motor (as
shown) and turn clockwise to raise the loft bed
into stored position.
9-10
5. Turn the key (located near the loft bed or
monitor panel, depending on model) to the
"OFF" position.
6. Fasten the safety belt whenever the bed is in
the stored position.
Loft Bed Ladder
The top of the loft bed ladder must be hooked
onto the brackets on the rear edge of the loft bed
for use. The bunk ladder is stored within the
bedroom area of the motorhome.