Table of Contents
Advertisement
SECTION 7 -
PLUMBING
To use Washer/Dryer again after seasonal
storage:
1. Reconnect water inlet hoses to corresponding
HOT/COLD faucets. Turn faucets ON.
NOTE: Check water inlet hoses and pump
periodically (see manufacturer's user
guide for further information).
2. Plug Washer/Dryer into electrical outlet or
reconnect power supply.
3. With Washer/Dryer power OFF, pour 1/2
TBSP. of powder detergent (or liquid
equivalent) into "Compartment 2" inside
Dispenser Drawer.
4. Advance Cycle Selector to "Position 9".
5. Press ON/OFF button, then press START.
6. Allow machine to run through the complete
cycle to clean out any remaining antifreeze.
Finished.
7-22
Advertisement
Table of Contents
