Figure 9: Initial Configuration Tasks
If ICT does not launch automatically, press Windows + R on your keyboard, type OEMOOBE and click OK.
Next Steps
You can perform the following tasks using the ICT:
•
Update the system settings such as, changing the local Administrator password and time zone.
•
Launch the Network Configuration wizard to configure and validate the network configuration, configure
email alerts, and register the product.
•
Create Storage Pools and Virtual Disks.
•
Enable software updates and enhancements directly from Windows Update.
•
Set up optional data protection solutions on StoreEasy 1X60 with cloud-based data backup, by replicating
data using Carbonite Double-Take Availability. The data protection solutions require separate licensing.
You can also use a free trial license for a limited time.
•
Download the HPE StoreEasy Management Console (SEMC) to provision storage, file shares, and quotas
more easily.
For further instructions on using the Initial Configuration Tasks, for additional configuration, and setup
information, see HPE StoreEasy 1X60 Administrator Guide available at
https://support.hpe.com/hpesc/public/home/documentHome?sp4ts.oid=1008632547.
14
Next Steps