Service And Maintenance Of The Environmental Protection Device - Wolf Blaze User Manual

Service and Maintenance for the Environmental Protection Device
Vehicle operators must conduct regular service and maintenance of the environmental protection system to ensure the best performance of the
assembly. With proper and regular service and maintenance, we can promptly eliminate faults, prolong the service life of the environmental
protection system, reduce the maintenance costs, and realize the goal of being environmental-friendly by reducing your vehicles fuel
Caution
The carburetor of the environmental protection device must be
serviced and maintained by a professional motorcycle repair shop or
the dealer's after-sales service personnel (make sure not to adjust the
carburetor without authorization)
39
USER'S MANUAL
consumption.
1 Regularly check whether there is any aging, air leakage or
damage on the intake negative pressure hose and the intake
plastic hose. If any, replace the intake negative pressure hose and
the intake plastic hose.
2 Regularly check the working conditions of the air pump of the
environmental protection device. If the air pump is blocked or
cannot work properly, replace the air pump of the environmental
protection device.
3 Regularly check the air filter. If any dust or dirt exists on the air
filter, the air flow will be reduced, thus changing the
concentration of the gas mixture, and increasing fuel
consumption. Therefore, it must be changed.
4. Regularly check the clamp for the intake vacuum hose, the
clamp for the clean air feed, and the mounting bolt for the metal
air pump intake pipe. If they are loose, tighten them.
Common Faults and Troubleshooting