Dometic RMV 5301 Installation Manual page 21

RMV5301, RMV5305
➤ Connect the refrigerator to the gas supply securely and without any voltage
according to fig. d, page 9.
The following applies for Europe: Use a cutting ring fitting in accordance with
EN 1949.
A hose connection is not permitted.
➤ Have a leak test and a flame test performed in accordance with EN 1949 by an
authorised specialist.
Ensure you are issued with a certificate of inspection.
9.2 Connecting to 12 Vg and 230 Vw
A
NOTICE!
• The electrical installation and repairs may only be performed by a
specialist in accordance with the applicable regulations and
standards.
• According to EN 1648-1, the respective negative and positive cables
of the DC connections for heating and lighting may not be joined
with one another in a caravan. This can cause electrical interference
or damage to electrical components.
• The inverter may only be connected by a specialist.
I
NOTE
• The mains socket must be easily accessible so that you can unplug
the power cord if required, thereby disconnecting the refrigerator
from the power.
• The plug of the AC connection cable must not be cut off.
• The connection cables must be laid so that they do not come in
contact with hot parts of the unit/burner or with sharp edges.
• Changes to the internal electrical installation or the connection of
other electrical components (e.g. extra third party fans) to the
internal wiring of the refrigerator will void the E1/CE approval and
any claims from the guarantee and product liability.
EN
Connecting the refrigerator
21