Menu - HP 16500C Programmer's Manual

MENU

Command :MENU <module>[,<menu>]
The MENU command puts a menu on the display. The first parameter
specifies the desired module. The optional second parameter specifies the
desired menu in the module (defaults to 0). Table 10-6 lists the module
parameters. The mainframe menus and parameters are listed in table 10-7.
Selects module or system. An integer from –2 through 5 for HP 16500C only
<module>
or an integer from –2 through 10 with an HP 16501A connected.
Selects menu (integer)
<menu>
Example
OUTPUT XXX;":MENU 0,1"
See Also
Programmer's Guide for specific module for the module's
Table 10-6
<module> values
Parameter
0
1
2
3
4
5
–1
–2
Available when an HP 16501A is connected:
6
7
8
9
10
Menu
System/Intermodule
Module in slot A
Module in slot B
Module in slot C
Module in slot D
Module in slot E
Software option 1
Software option 2
Module in slot F
Module in slot G
Module in slot H
Module in slot I
Module in slot J
Mainframe Commands
MENU
values.
<menu>
10–15