Table of Contents
Advertisement
Button/port
DC IN
Connect with DC Power Adapter.
Reset
Reset configurations to default. Press the button and hold for 10
seconds.
WPS
Click WPS button about 2-3 seconds while you are connecting a PC of
wireless adapter with WPS function (you must enable WPS' PBC
function).
LAN
Connect LAN systems with RJ-45 cable.
(1x, 2x, 3x, 4x)
WAN
Connect DSL or Cable modem.
1.4 System Requirements
Before installing the Wireless Router, ensure that your system/network meets he following
requirements:
‧ One or more PCs (desktop or notebook) with Ethernet interface.
‧ TCP/IP protocol must be installed on all PCs.
‧ Have valid Internet Access account and a DSL or cable modem.
‧ 10Base-T/100Base-TX network cables with RJ-45 connectors.
‧ In case to use Wireless Access Point, all Wireless devices must be compliant with
IEEE 802.11b/g.
‧ System with MS Internet Explorer ver. 6.0 or later version
1.5 Before you proceed
Take note of the following guidelines before installing the Wireless Router:
‧ The length of the Ethernet cable that connects the device to the network (hub,
ADSL/cable modem, router, wall patch) must not exceed 100 meters.
‧ Place the device on a flat, stable surface as far from the ground as possible.
‧ Keep the device clear from metal obstructions and away from direct sunlight.
‧ Keep the device away from transformers, heavy-duty motors, fluorescent lights,
microwave ovens, refrigerators, and other industrial equipment to prevent signal loss.
‧ Install the device in a central area to provide ideal coverage for all wireless mobile
devices.
Description
8
Advertisement
Table of Contents
