Wps - Advantek Networks AWR-654GR User Manual

connection to the Wireless Router of 802.11g and 802.11b wireless mobile clients. Select [54g
Protection] to enable G-Mode protection for 802.11g traffic automatically in the presence of
11b traffic.
Authentication Method: This field enables the authentication methods for wireless clients.
WPA Encryption: Enable WPA Encryption to encrypt data.
WPA Pre-Shared Key: This field requires a password of 8 to 63 characters to start the
encryption process. If you leave this field blank, the default [00000000] will be assigned as
your password.
WEP Encryption: Enable WEP Encryption to encrypt data.
Key Index: Set the WEP key to transmit data on your wireless.
WEP Key 1~4: Only valid when using WEP encryption algorithm. The key must match with the
AP's Key.
Passphrase: Select [WEP-64bits] or [WEP-128bits] in WEP encryption field to generate four
WEP keys automatically.
Network Key Rotation Interval: This field specifies the interval (in seconds) after which a
WPA group key is changed. Enter [0] (zero) to indicate that a periodic key-change is not
required.

4.2.2 WPS

WPS (Wi-Fi Protected Setup) provides easy and secure establishment of a wireless network.
You can configured WPS here via the by PIN code method.
Enable WPS: Allowing Wi-Fi Protected Setup (WPS) to simplify the process of connecting any
device to the wireless network. WPS support the authentication of Open system, Share key,
WPA-Personal, WPA2-Personal. Not support WPA-Enterprise, WPA2-Enterprise and Radius.
19