Transport Input None Line Vty 0 - Cisco uBR924 Configuration Manual

VoIP Bridging Configuration Using H.323v2
In this example, the Cisco uBR924 is configured for bridging, with an H.323v2 dial peer to another
Cisco uBR924 attached to the same downstream interface on the headend CMTS.
interface cable-modem0
ip address 10.1.0.25 255.255.0.0
no ip directed-broadcast
ip pim sparse-dense-mode
no ip route-cache
no ip mroute-cache
cable-modem downstream saved channel 477000000 56
no cable-modem compliant bridge
!
!
router rip
version 2
network 24.0.0.0
network 10.0.0.0
!
!
ip classless
no ip http server
!
!
line con 0
transport input none
line vty 0 4
!
end
Current configuration:
!
! Last configuration change at 21:54:41 - Thu Apr 29 1999
! NVRAM config last updated at 21:56:20 - Thu Apr 29 1999
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname 2007
!
!
clock timezone - 3
ip subnet-zero
no ip routing
!
!
voice-port 0
input gain -3
!
voice-port 1
input gain -3
!
dial-peer voice 1 pots
destination-pattern 6501
port 0
!
Bridging and Routing Features for the Cisco uBR924 Cable Access Router 23
VoIP Bridging Configuration Using H.323v2