Sharp CD-CH1500H Operation Manual page 117

The connection lead is not included. Purchase a commercially available lead as
shown below.
Connection cable for
digital recording
„ To record CD signals on MDs (digital out-
put)
The digital signal from this unit can be recorded by MiniDisc recorders, etc.
1
Remove the DIGITAL OUT socket cover.
2
Use a connection cable for digital recording to connect the unit to
the OPTICAL/LINE IN socket of a MiniDisc recorder, etc.
3
Put the MD, etc. in the recording mode.
4
Play a CD on this unit.
MiniDisc
Note:
Recorder
Only CD signals can be output.
„ Headphones
z Before plugging in or unplugging the headphones, reduce the volume.
z Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
To the OPTICAL/
LINE IN socket
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
z Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
ENGLISH
01/1/9 E4.fm
E-35