Adjusting The Volume And Screen Brightness; Using Sd Memory Cards - Nintendo DS Operation Manual

15
Adjusting the Volume/Screen Brightness
Adjusting the volume
1. Press the Volume/Screen Brightness Control in either
direction to change the volume.
the volume.
but not increased.
NOTE:
regardless of the current setting of the volume control.
IMPORTANT: Under some conditions, noise from the Nintendo DSi speakers can cause audio
feedback with the Nintendo DSi microphone. If you hear screeching, howling or other unexpected
noise from the speakers, turn down the volume or use a set of stereo headphones.
Turn the power on while holding down the
Adjusting the screen brightness
1. Hold down SELECT.
2. Press the Volume/Screen Brightness Control in either
direction to change the screen brightness.
decrease the brightness.
NOTE: Changing the screen brightness will also change the
brightness of the power indicator LED and the wireless indicator LED.
NOTE: Increasing the screen brightness will increase the power consumption. As a result, the power
indicator LED may change from blue to red when the screen is made brighter. When this happens, note
that the battery may run out and the system may lose power soon after the LED turns red.
The relationship between screen brightness and battery duration
Increasing the screen brightness will reduce the battery life. Decreasing the screen brightness
will increase the battery life. Adjust the brightness based on your preference. See page 11 for
more information.
available SD Cards you will be able to:
Volume NOTE:
It may not be possible to copy some software.
Data copied to SD Cards cannot be used on other systems.
Save data on Game Cards cannot be copied.
Song or sound files from the SD Card that have been manupulated are not saved.
IMPORTANT: An SD Card adapter is required to use miniSD or microSD
Cards. When using a card adapter, be sure to remove the entire adapter
could result if the card adapter is left in the system.
+
Hold down Turn power on
Inserting an SD Card
1. Open the SD Card slot cover.
Do not pull or twist the slot cover forcefully. Doing so
could stretch or deform it, which could could prevent the
cover from closing correctly.
2. Insert the SD Card into the SD Card slot until it clicks into
place. Make sure the label side faces down.
Hold down
Removing an SD Card
Screen Brightness
1. Open the SD Card slot cover and press on the end of the
card until it clicks and partially ejects from the slot.
2. Grasp the SD Card and remove from the card slot.
IMPORTANT: Do not remove the SD Card while data is
being read or written. This could damage the system or
the SD Card, or destroy data.

Using SD Memory Cards

16
Label faces down