Snapper SPV21675, SPV21675E, NSPV21675, NSPV21675E Safety Instructions & Operator's Manual page 24

21" VARIABLE SPEED
REAR DISCHARGE
WALK BEHIND
MOWERS
Product Specifications (All)
Deck Size (in)
Height of Cut (in)
Transmission Type
Ground Speed (mph)
Engine Power (ft-lbs)
Engine Displacement (cc)
Fuel Tank Capacity (qt)
Engine Power Rating Information: The gross power rating for individual gas engine models is labeled in accordance with
SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating perform-
ance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060
RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other
things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines
are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the
rated gross power when used in a given piece of power equipment (actual "on-site" or net horsepower). This difference is due
to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump,
etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability.
Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.
Snapper Products
535 Macon Street
McDonough, GA 30253
22
Common Service Parts
21
1.25 - 4
Variable Speed/Gear
0 - 4.2
6.75
190
1.6
1-800-317-7833
Blade Control Cable
Wheel Drive Control Cable
Cutter Blade (Double Wave)
Drive Belt
Parts Manual
Part Number
7101399
7101398
7100242
7100883
7006259
www.snapper.com