HP iPAQ hx2000 Series User Manual page 86

Logging On Using a PIN and Fingerprint
You must enter both a PIN and swipe the fingerprint you entered
during setup.
1. Turn on your iPAQ Pocket PC.
2. Enter your 4-digit PIN.
3. Swipe your enrolled finger.
Logging On Using a Password or Fingerprint
You must enter a password or swipe the fingerprint you entered
during setup.
1. Turn on your iPAQ Pocket PC.
2. Enter your password or swipe your enrolled finger.
✎
To type letters, numbers, or punctuation, tap the Keyboard
button at the bottom right corner of the screen. If you do not enter
the correct password, you will be prompted to try again.
3. Swipe your fingerprint if you did not enter your password.
Logging On Using a Password and Fingerprint
You must enter both a password and swipe the fingerprint you
entered during setup. iPAQ Fingerprint Reader remembers your
logon preference.
The next time you logon, the Password or Fingerprint screen
corresponding to your last logon will be displayed.
1. Turn on your iPAQ Pocket PC.
2. Enter your password.
✎
If you do not enter the correct password, you will be prompted to
try again.