Canon imageFORMULA DR-G2140 User Manual page 53

5
Press the ▲▼ keys to specify the long document mode.
According to the document length, select [Long Document
(1000 mm)], [Long Document (3000 mm)], or [Long Document
(5588 mm)].
Hint
The [Long Document (5588mm)] setting is not available in the
DR-G2090.
6
Press [OK] to accept.
7
Press the Menu key to return to the original screen.
IMPORTANT
• Scanning in Long Document Mode can slow down the
processing speed.
• When Long Document Mode is set to [Long Document
(3000 mm)] or [Long Document (5588 mm)], the scanned
image may be lost if the scanning mode is set to color and
Image Quality is set to [Image quality priority]. In this case, scan
the document in black and white or reduce the Image Quality
setting.
• When Long Document Mode is set to [Long Document
(3000 mm)] or [Long Document (5588 mm)], the scanned
image may be lost if scanning is performed at 400/600 dpi or
the scanning mode is set to color and the scanning side setting
is "Duplex". In this case, lower the resolution, scan the
document in black and white or select the "Simplex" scanning
side setting.
• If a sheet is loaded at a skewed angle when scanning long
documents, it may be damaged by contacting both sides of the
feed path. Be careful to place the document so that it is not
skewed.
• Paper jam detection may react slowly when scanning long
documents, which could result in damage to the jammed
documents. Be especially careful to avoid paper jams.
• To scan long documents, enable the [Separation Off], and
manually feed pages one by one.
53
"Separation Off" (See p. 66)