Setting Up The Machine - Canon imagePASS-G1 Installation Procedure

Setting Up the Machine

1.2.3
1) Press (=>) displayed at upper right on the LCD of
the connecting device.
2) At the Control Panel, press [Printer]tab.
3) Press [Printer Status/Settings].
Printer
Printer Status/
Settings
Input of password
When setting it up, the password input screen is dis-
played.
When the following password is input, you can enter
a setup screen.
Fiery.1
In response, the machine will automatically show the
Settings menu. Be sure to at least select the following
and make the appropriate settings in the indicated or-
der: [Server Setup], [Network Setup], and [Printer
Setup]. For more information, see Configuration and
Setup on the User Documentation.
Run S etup
Se rve r Se tup
Ne twork Se tup
Printe r Se tup
PS Se tup
PCL Se tup
For instance, once you have made the various settings
under [Server Setup], you will be shown a screen ask-
ing you if you want to store the settings. Select [yes]
so that the system will be stored in memory. Unless
you have made appropriate settings in the correct or-
der and saved them, you will not be able to go on to
the next item.
Making Server Settings:
Make the appropriate settings including the name
of the server.
Enter S erver Name
PS_Server
Making Network Settings:
Make the appropriate settings including port,
protocol, and service.
7
1/3
Done