Snapper S150XK0H2348 Parts Manual page 7

Rear Bumper & ROPS Group
REF NO. PART NO.
1 5100267
2 5025396
3 5400844D
4 5100139
5 5100190
6 5025158
7 5025155
8 5025011X6
9 5025392
10 5403116D
11 5025017X10
12 5402793D
13 5402934D
14 -
15 -
16 -
17 5100383
18 -
19 -
20 5100079
21 5025018X10
22 5025098
23 5400847D
24 5100377
25 5100545
26 5025440
27 5101223
28 5101226
Footnotes
NOTE: * Contact Yard Power Products Group Service Department at 1-800-933-8175 ext.709 for ROPS replacement parts.
You must provide the Custom Products serial number for the ROPS system.
The above parts group applies to the following Mfg. Nos.:
5900665
5900686
5900696
5900697
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
QTY. DESCRIPTION
2 SCREW, 1/2-13 X 1.00, SHCS
6 NUT, 1/2-13 HEX NYLOCK FLANGE
1 PLATE, SEAT BELT ANCHOR - LH - RED (TWO USED ON MODELS WITH
SUSPENSION SEAT)
1 SEAT BELT, RETRACTING - ASSM (MODELS WITHOUT SUSPENSION SEAT)
1 ROPS COMPLETE IN BOX, SNAPPER PRO 48/52
4 WASHER, 1/2 SAE
6 WASHER, 5/16 SAE
6 BOLT, 5/16-18 X 3/4 GD5
6 NUT, 5/16-18 HEX NYLOCK FLANGE
1 PLATE, HEAT SHIELD - RED
4 BOLT, 1/2-13 X 1-1/4 GD5
1 PLATE, CARB. SHIELD - RED
1 WELD, PLATE, BUMPER - RED
1 * ROLL BAR POST, RH (SV)
1 * ROLL BAR POST, LH (SV)
1 * ROLL BAR TOP LOOP (SV)
2 RUBBER BUMPER (SV)
2 * BOLT (SV)
2 * NUT (SV)
2 PIN, HITCH, BLACK W/ PLASTIC LANYARD (SV)
2 BOLT, 1/2-20 X 1-1/4" GD8 YZ
2 NUT, 1/2-20 HEX NYLON LOCK
1 MOUNT, SEAT BELT - RH - RED (MODELS WITHOUT SUSPENSION SEAT)
1 ROLL BAR HARDWARE BAG (SV) (INCLUDES HITCH PIN)
2 RUBBER WASHER (SV)
2 WASHER, 1/2", GD9, YZ
1 SEAT BELT, SUPER SLEEVE (MODELS WITH SUSPENSION SEAT)
1 SEAT BELT, RETRACTING (MODELS WITH SUSPENSION SEAT)
7
TP 400-7331-F-M1-SP