Section 1 - Familiarization - Snapper RP216019KWV Safety Instructions & Operator's Manual

Section 1 - FAMILIARIZATION

WHEEL DRIVE
CONTROL
ENGINE
SPEED
CONTROL
ROPE
START
HANDLE
FUEL FILL *
REAR HEIGHT
ADJUSTMENT
LATCH
SPRING-LOADED
RECYCLING COVER
1.1 INTRODUCTION
This manual has been prepared for the operators of
the SNAPPER WALK BEHIND MOWERS. Its
purpose, aside from recommending operating and
routine service requirements, is to promote safety
through the use of accepted operating practices.
Read, Understand and Follow the "IMPORTANT
SAFETY INSTRUCTIONS" on Pages 2 - 4 of this
manual and all safety messages on the mower and
attachments before operating the mower.
BLADE
CONTROL
GROUND SPEED
CONTROL
* LOCATION MAY
VARY BY ENGINE
OIL FILL
AND DIPSTICK *
FIGURE 1.1
6
BRIGGS
ENGINE
SPEED
CONTROL
FAST
SLOW
FRONT HEIGHT
ADJUSTMENT
LATCHES
1.2 NOMENCLATURE
The nomenclature drawing above, Figure 1.1, shows
the essential parts of the SNAPPER WALK BEHIND
MOWERS. It is recommended that all operators of
the mower become thoroughly familiar with the
controls, parts and operation of the mower before
operating. Specific details involving the engine are
found in the separate engine owner's manual. Study
these manuals before operating and keep both
handy for future reference.
KAWASAKI
ENGINE
SPEED
CONTROL
CHOKE
FAST
SLOW
ENGINE PRIMER
(BRIGGS ENGINES ONLY)