Service - Every 25 Operating Hours; Engine; Fuel Filter; Spark Plug - Snapper LT160H42FBV Operator's Manual

Hydrostatic drive electric clutch series f
Table of Contents

Advertisement

Section 3 - MAINTENANCE
3.4 ANNUALLY (END OF EACH SEASON)
Perform
all maintenance
as described
in Section
"SERVICE - EVERY 25 OPERATING HOURS". Also
see Service Schedule.
3.4.1.
ENGINE
1.
Service
engine
according
to engine
owner's
manual.
3.4.2.
FUEL FILTER
1.
Service fuel filter as instructed below, on COLD
ENGINE ONLY!
NOTE: It may be necessary to drain the fuel tank before
removing fuel filter to prevent spillage of gasoline.
2.
Locate fuel filter. Remove hose clamps and fuel
hoses from both sides of fuel filter.
3.
Install new fuel filter part number
1-4359. See
Figure 3.12.
NEW FUEL FILTER
PART NUMBER 1-4359
FIGURE 3.12
4.
Fill fuel tank with fresh gasoline. Refer to engine
owner's manual for fuel specifications.
3.4.3.
SPARK PLUG
Remove
and replace engine spark plug. Refer to
engine owner's manual for correct replacement plug
and gap specifications.
3.4.4.
HYDROSTATIC TRANSMISSION
OIL
The
hydrostatic
transmission
does
not
require
maintenance.
If
any
problems
arise
return
immediately to a Snapper dealer.
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lt160h42fbv2Lt180h48fbv2

Table of Contents